Welcome to rideSafer!

P115W-H3-HD

Be the first to review this product

Availability: In stock

Regular Price: $129.95

Special Price: $110.46

Quick Overview

Heavy Duty dual-channel with or w/o adapters

* Required Fields

Regular Price: $129.95

Special Price: $110.46

P115W-H3-HD

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

P115W-H3-HD

Click to see a larger P115W-H3-HD image

 

P115W-H3-HD is a heavy duty, dual MOSFET configuration. This is an EXTERNALLY mounted unit.

For plug-n-play installation, select Bulb Adapter Option below. The Aadpters will come pre-installed with the unit. For wiring with screw-in terminal, choose NONE.

Unit is 1.0"(25.4mm) by 1.35"(34.4mm), and externally mounted. The screw-in terminals make the installation quite simple. 

pathBlazer circuit modulates the hi-beam and lo-beam current - from 100% ON to about 17% OFF. This is accomplished by using two p-channel MOSFETs, which are inherently safe. The MOSFET is designed to fail in the ON state. For additional safety, the circuits DO NOT utilize the lo-beam whatsoever!

MAX power rating is 115 watts. DO NOT EXCEED! 

P115W-H3-HD comes with a detachable daylight sensor, which simply plugs into the pathBlazer. The daylight sensor functions as a switch; it stops modulation when it cannot see enough daylight. Since the internal circuitry is controlled by a microprocessor, it allows for customizable features.

Programmable Daylight Sensor

If you turn the high beam on and then turn the ignition on three times quickly, the sequence is interpreted as an active command to change the sensitivity.

Software version v.823A allows 8 linear steps between the high and low end.

The daylight sensor has a low frequency filter to avoid false triggering. Please note that florescent lamps may not trigger the sensor - it needs constant incandescent light. 

pathBlazer uses a soft-switching technique. It throttles the current flow through the bulb filament, so that there's no "thermal shock" due to a sudden inrush of current, which can damage the bulb filament or shorten its life considerably. This is far superior than maintaining a small voltage! 

Select hi-beam to modulate - as long as there's sufficient daylight. If you enter a tunnel or if it gets dark, it will stop the modulation of the hi-beam and stay ON steady. Select lo-beam to end modulation.

You have complete control.


Click here for Installation Manual

You may also be interested in the following product(s)

Interchangeable Strobe Lenses

Interchangeable Strobe Lenses

Regular Price: $12.95

Special Price: $9.95

P115W-H3

P115W-H3

Regular Price: $109.95

Special Price: $93.46

Stebel Chrome Dual Compact Air Horn

Stebel Chrome Dual Compact Air Horn

$79.95
 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.